Activity
From 2010-03-23 to 2010-04-21
2010-04-21
- 18:54 Revision 1dd7a61b: Statistics tab tweaks
- 18:45 Revision 2b137b5e: Renamed invite button
- 18:44 Revision 3e845627: Widget positioning tweaks
- Added audio jitter buffer
Renamed audio in/out buffer labels
Tabs have now the focus on startup
Audio Levels don't ta... -
17:13 Bug #433 (Closed): Increase timeout before SIGKILL for streamer processes.
- Increased from 5 to 10 seconds in r5708.
- 17:13 Revision e04afb16: Probably fixed #433 (Increase timeout before SIGKILL for streamer processes.)
-
- Done in r5707.
- 17:10 Revision 65981df3: Fixed #425 (When you disable video reception (or the other side disable video ...
- Also allows one to use scenic without JACK if not streaming audio.
-
- Fixed in r5706.
-
- Though it calls Application.poll_camera_devices() in Application._start_the_application().
Fixed in r5706. - 16:54 Revision e2d87beb: Fixed #434 (Scenic doesn't list resolutions supported by the camera at startup.)
-
16:16 Bug #437 (Closed): if audio and video are desynchronized, they should each have independent jitte...
- otherwise, the audio one should be set to insensitive.
-
- Done in r5705.
- 16:04 Revision 71fcec64: oops
- 16:01 Revision 74e49ea4: Writing the streaming info in the tab only once + fixed (?) bug with is_negoti...
-
- fight to the death with audioconvert
-
- Done in r5703.
- 15:39 Revision 335faceb: Fixed #418 (Cannot log to a single file)
-
- waiting on
https://bugzilla.gnome.org/show_bug.cgi?id=616421 -
- ...to allow speex and raw, for example.
- 13:32 Revision 57ebae7a: More glade alignment
-
- fixed in gstreamer git
2010-04-20
-
- It doesn't update list of supported capture sizes at startup.
It's OK when we switch from an other tab to the vid... -
- We send milhouse kill -15, and then kill -9 before it's done....
-
- Looks fixed as or r5701.
- 17:22 Revision 6420f512: oooops
- 17:19 Revision 5c50159d: get packet-loss percent stats in scenic, check if negotiation is in progress
- 17:17 Revision 136d2ed9: oops
- 17:12 Revision 7f0a5dae: adding has_negotiation_in_progress()
- 16:57 Revision 8691ea64: only calculate packet loss when we get packet lost reports so that averages ar...
- 16:39 Revision e7f4d4b7: MIDI is disabled by default. That makes more sense.
- 16:31 Revision 31cf1dfd: invitations don't expire anymore
-
- output looks like this:
2010-04-20 16:12:29-0400 [-] sending {'protocol': 'SIC 0.1', 'please_send_to_por
t': 1744... -
- I cannot observe the symptoms anymore.
-
- Fixed in r5694.
- 15:41 Revision 834e4cc0: Fixed #431 (If a port is not available, scenic should increment the port numbe...
-
- ...
-
- fixed in r5693.
- 15:21 Revision 0a127b2f: Fixed #424 (Before the first stream, the invite button is greyed out)
- Also got rid of some useless buggy lines of code.
-
-
- I don't know what is this delay caused by.
-
- Strip white spaces from the address field
-
- We should do (in Glade) set_selectable on those:
* all the stats labels
* the JACK latency
It's useful for d... - 11:30 Revision 5ce0e1bf: More glade love
-
- Done in r5691.
It was only the MIDI that was actually not enabled. I've enabled it. - 11:30 Revision 70e0e773: Fixed #427 (At first, all the streams should be enabled)
-
- And they are not.
The sync with video should be enabled too. -
- One needs to select an other video source, then V4L2 again. They are then populated.
-
10:50 Bug #425 (Closed): When you disable video reception (or the other side disable video sending), sc...
- When you disable video reception (or the other side disable video sending), scenic still won't work if you don't have...
-
- but clickable
2010-04-19
- 18:27 Revision 177b882d: user manual toc
- 18:15 Revision 392685dd: toward reliable packet loss metrics
-
- add celt support for milhouse
-
- this may have fixed it in gst-plungins-base 0.10.29:
https://bugzilla.gnome.org/show_bug.cgi?id=615647 -
- Currenty we have stats for packets-lost over the entire sessions. We should look at changes in these totals to calcul...
-
-
2010-04-16
-
- Reasons might be:
* Jackd is not running on the remote host.
* The remote peer is already engaged in a session.
* ... -
- Add a --display=:0.0 option to scenic
-
- It should be a separate option.
-
- ...
- 17:59 Revision 7ba06117: support v4l when only one framerate works
-
- yo,
peux-tu rouler la commande avec --debug debug et m'afficher l'output. -
- I tried scenic and milhouse at home on my [[WinTV]]. Milhouse sender crashed in both cases. ...
2010-04-15
- 19:55 Revision 1bccbe8b: added som glossary elements
-
- Fixed in r5685.
- 18:16 Revision eab99243: Fixed #359: JACKD: Key 'period' is missing for the jack server process
- 17:59 Revision 447f4c68: Using docbook installation documentation when opening help.
-
- have preview/vumeters running all the time when possible
-
- tunerinterface has a terrible API, so it's not worth using
-
- Fixed in r5682
- 17:39 Revision f2fb3498: :first test on user-manual
- 17:34 Revision a4d226d8: better fps support in video sender
- 17:34 Revision 3527a567: Fixed tabs scale on window resize
- 17:24 Revision 8d5779ee: throw link exception
- 17:23 Revision e4d7bd4a: Installing docbook installation manual.
- 17:14 Revision 706f5c60: try other framerates if we fail at linking
- 16:30 Revision 9f56c55c: Added levels.png to installation
-
- Fixed in r5676
- 15:39 Revision d7bf92e7: check for attribute existence in set_config. use proper attribute name for aud...
-
- this is a regression
-
- audio channels not respected in preview
-
- It's redrawn every second.
It should be drawn only when we start streaming, and not cleared up when it stops. -
- done in r5675.
- 15:03 Revision cd33e43f: Removed contact name from the invite button.
- 15:01 Revision cdb4f02b: more debuggin
-
- ...
-
- It calls whoami and hostname!...
- 14:39 Revision c8f58986: Set capsfilter first
-
- using yelp
-
- That will give it a constant width, or almost.
-
-
- I think this happens when midistream crashes.
-
- Actually, if I choose input Composite 1, for example, for a /dev/video0 device, when we reboot the machine it will be...
- 14:28 Revision b2ab52d9: get v4l2 framerate from v4l2 element
-
-
-
-
- When contact is not in addressbook and he invites us, the invite button is not changed to "stop streaming".
- 11:24 Revision d036669f: More glade tweaks
- More svn:ignores : jack-info, vumeter
2010-04-14
- 18:47 Revision a9ad1d45: Cosmetic changes, upper part mostly done
-
- however, how good the info returned is depends a bit on the driver and kernel version. There is API to enumerate the ...
-
- set v4l2src to READY state, then do a _get_caps() on its source pad
-
- On a Macbook Pro's iSight, the image size 720x480 is only supported at 25FPS, not 30FPS. Thus, 720x480 does not work ...
- 18:06 Revision 162e0dce: we don't change MTU
-
- Otherwise the user can't copy paste from it.
-
- Done in r5668
- 17:56 Revision aa52b16a: Merged changes in branch synchronize since r5657 to trunk.
- Implementing the ability to desynchronize audio and video
- 17:54 Revision 431b2e1e: merge trunk since r5657 to branch synchronize
- 17:54 Revision f7dd133d: merge trunk since r5657 to branch synchronize
- 17:52 Revision 6e5b6159: Making the sync widget insensitive when streaming
- 17:45 Revision d6cdac36: fix
- 17:44 Revision b9b4b3be: fix
- 17:43 Revision 8ded4947: fix
- 17:41 Revision 8f86d652: disbale the "normal" sender/receiver if desynchronized and no video
- 17:37 Revision 558e90d1: Moved invite button with contact list
- 17:28 Revision 2b342632: copying lists copies the pointers
- 17:21 Revision f4846ed8: experimental desynchronization of audio and video. More processes
-
- Mke sure to remove old mivilles eggs in /usr/local
- 16:49 Revision 08bdc097: don't use other settings for x264
-
16:43 Bug #406 (Closed): midi / gui bug. Blocking the video cam usage on some laptop
-
- ...
-
- 2010-04-14 16:34:06-0400 [-] [[ComboBox]] widget <gtk.ComboBox object at 0xa5a9a7c
(GtkComboBox at 0xa5eb000)> does... - 16:32 Revision cc0fc4d9: merged changes in branch synchronize since r5648 to trunk
- 16:14 Revision 35717010: Printing the command lines in the debug tab
- 15:29 Revision 1968362c: Merged changes in trunk since r5648 to branches/synchronize
- 15:27 Revision 3a642f46: added the debug option to show the debug tab. Default is hidden
- 15:07 Revision 14c8ca42: Added Debug tab
- 12:44 Revision e5917d99: svn:ignore for src/vumeter
- Swapped contacts and summary in scenic.glade, more to come
- 12:07 Revision 6abe8c37: Simplified the way the command lines are printed in the summary.
- Still need to create a scrolled window (and a viewport) for the command lines.
Improved the encapsulation of the stre... - 11:19 Revision d33a9a10: Done with the simplification of the set/get widgets/config values.
- 11:09 Revision fbf61f0f: not working, but I am in a branch.
- 09:54 Revision 71658df8: Created branch synchronize from trunk at r5647
- 00:50 Revision c430e0aa: milhouse doesn't need to know about gdk
2010-04-13
-
- One must open ports:
* 17446 TCP
* range 10000-11000 TCP and UDP -
- Done in r5647
- 18:05 Revision af9a2dc3: Merged changes in branch disabled since r5620 to trunk.
- Implemented the possibilty to disable send/receive audio/video.
- 17:39 Revision afc9f9c0: got rid of extraneous threads_enter
- 17:25 Revision 02213bda: have line breaks at the right time
-
- 16:40 Revision 4566e647: provide bug report info on error
- 16:11 Revision 148c285b: public data is gross
-
- It prints this:...
-
- When the lines are too long, they are clipped. They should wrap.
We could use a [[GtkTextView]]. (non-editable) - 12:56 Revision 1bb94667: Tweaked audio levels icons
- 12:55 Revision 8e862942: Cleaned up the audio tab
- 12:31 Revision 69a05d89: deleted useless commented lines
- 12:30 Revision d6ee3215: Merged changes in branch buffer since r5610 to trunk.
- Closes #350 (add audio-buffer setting in scenic)
- 12:29 Revision f98bd533: Merged changes in trunk since r5609 to branch buffer.
-
- done in r5615 for version 0.5.1
- 12:23 Revision ccf3ff7f: Added audio buffer info in the summary.
2010-04-12
-
- fixed in r5613
- 17:34 Revision 61a3911e: fixed preview in branches/buffer
- 16:40 Revision e6940082: don't create gmainloop instance, fixes #393, only depend on GDK_CFLAGS in main
- 16:20 Revision 03426301: implemented audio_buffer
- 15:56 Revision f329978c: creating branch buffer from trunk @ r5609
- 14:57 Revision d11ef206: explicitly state private inheritance
- 14:47 Revision c9930442: more forward declarations
- 13:06 Revision 742c24fd: more forward declaration
- 12:55 Revision 1bd14ac5: added widgets in glade. Made them insensitive and enabled.
- New widgets:
* audio_input_buffer
* audio_output_buffer
* audio_receive_enabled
* audio_send_enabled
* audio_vid... - 12:52 Revision e7b976d4: more dependency reduction
- 12:38 Revision bb3dbbca: slightly better dependency hiding
- 12:21 Revision 7f7449e8: moved header out of main
- 11:27 Revision 13d53d66: updated version in trunk to 0.5.1
- 11:10 Revision 2fef10bd: Merged changes in trunk since r5596 to branches/0.5 to prepare the 0.5 tag.
2010-04-09
- 18:19 Revision aba85c4b: Added audio levels icon
- 18:05 Revision 9007768d: increase peak-falloff rate
-
- We get the following message : ...
-
- That will leave more space, since the addressbook is smaller. We will be able to put more stuff in the summary.
-
- see http://www.micahcarrick.com/05-30-2008/gtk-builder-libglade-faq.html
-
- This is the format that is the future of Glade since 2008.
- 17:18 Revision aee0015a: made new branch 0.5 from trunk@5595
- 17:18 Revision a0a706d3: changed release notes
- 17:16 Revision 83255747: updated release notes
-
- merged in trunk in r5593
- 17:13 Revision df9e7f15: updated RELEASE
- 17:00 Revision 56042fe9: merged back branches/vumeter into trunk@5591
- 16:57 Revision 7a6de089: merged back trunk@5489:5590 in branches/vumeter
- 16:39 Revision 907b0ba5: moved gst_init and gtk_init calls to later as we don't need them for a bunch o...
- 16:34 Revision 4d303143: improved audio levels tab appearance.
- 16:23 Revision 510d1213: movhd the menu out of the scrollable area
- 16:18 Revision 066a53ed: changed spacing in audio tab
- 16:16 Revision 37f20d3f: moved the addressbook buttons on top of it instead of under it
- 16:03 Revision efcdc6bc: Gui now scrollable
- 15:51 Revision 2d834e27: made the invite button not collapsable
- 15:44 Revision 8deb1b2f: don't draw decay peak for silence
- 15:39 Revision 39c8cd33: no bevel around scrolled window, surprisingly annoying to do
- 15:16 Revision f9eed698: improved parasite_scenic.sh
- 15:11 Revision dd345be7: changed width/height of the main window: can now be resized smaller
- 15:10 Revision ef0984d5: use auto scroll policy
- 15:03 Revision 09fd91d4: changed the Vbox orientation to vertical
- 14:49 Revision 22ebb239: use a scrolled window so that are vumeters don't get clipped
- 14:18 Revision 5350d645: video preview doesn't depend on jack
- 14:07 Revision fdfe25ce: added parasite script
- 12:00 Revision 02470f62: Added test script
- 11:59 Revision 40e520e7: need local audio in svn
- 11:20 Revision 6c769bfd: decay peak should be red if we're over 0.0 db
- 11:12 Revision e86b2f03: don't set attributes when you don't have to
- 11:02 Revision 66144b0a: default peaks should be at -70 so we don't get a misleading spike on startup
- 10:52 Revision 375cfc3b: vumeters are fixed size, properly packed
2010-04-08
-
- Bugfix:...
-
- This is on Ubuntu Karmic. (9.10) python-twisted-core version is 8.2.0-3
-
- There seem to be a problem with twisted.python.usage or so, when trial loads the Twisted plugins. Here is the traceba...
- 16:32 Revision 7cb57611: added vumeters on preview
- 16:21 Revision d916897f: use positive booleans as it's easier to follow
-
- Replying to [comment:1 tristan]:
> fixed in r5663
sorry fixed in r5563 -
- fixed in r5663
- 16:14 Revision d1334e28: Added localaudio
- 16:10 Revision 5f7fc7aa: Release notes for the 0.4.5 version.
-
- We could not delete any contact or change their auto answer property.
- 15:31 Revision b1b5a527: better options for valgrind script
-
- mostly useful for testing vumeter
- 14:58 Revision 917db69b: added gtk-friendly valgrind script
- 14:34 Revision adb787d3: set clip region on expose event, only redraw surface on expose event
- 14:02 Revision 90b04969: better ttl values, colour of decay peak is always green
2010-04-07
- 15:46 Revision d1b5dea6: connect sockets to plug removed callback
- 15:30 Revision cb551dc3: fixed make distcheck in branch
- 15:26 Revision 0de5c4b3: fixed autogen
- 15:15 Revision 46e381ee: decay peak colour changes
- 15:05 Revision c8d5da1a: update peak falloff
- 14:56 Revision 2e446657: make milhouse use new vumeter api
-
- Note:
this bug isn't in karmic, it's in the current git HEAD of gstreamer - 13:44 Revision 71451544: added decay peak in vumeter
2010-04-06
- 18:18 Revision 4e699e4a: use solid rectangles instead of gradient
- 15:34 Revision 64e03215: skinny lines for vumeter
- 12:14 Revision 4aaecc1f: use http instead of ftp to get x264 snapshot
- 12:12 Revision cc07463e: use http, not ftp for x264
- 10:46 Revision fabb565f: docbook html folder deleted
- 00:33 Revision 273f50af: docbook formatting, added pictures, html basic export
2010-04-05
- 10:39 Revision 276a0cf5: added instructions in the installation manual. stylesheet test for html and pd...
2010-04-01
- 19:05 Revision f7c200e0: draw dashes, they could be slimmer
- 18:08 Revision 8ecd0b8c: use db scale
- 17:52 Revision e983c64e: moved the author and the about part in docbooc
- 17:26 Revision 6a0b19f5: added decibel labels
- 12:13 Revision bb706270: don't duplicate size info, it's already in widget allocation structure
- 11:53 Revision 14c132e1: resizable widgets
- 11:14 Revision 7578b663: retrun tru on plug removed so that socket can be reused
2010-03-31
- 17:54 Revision 02b1f826: fixed bad linking of audio level
- 17:45 Revision 1dbd3ff1: fixed glade name for real
- 17:38 Revision b59b5b94: fixed glade for audio levels output
- 16:55 Revision 9640e123: thinner widgets, closer to meterbridge
- 16:18 Revision ab6d4bbf: audio device table added in docbook
- 14:07 Revision 23964363: undo silly changes in test
- 14:05 Revision a9862fa3: use gradients, nicer look
2010-03-30
- 12:30 Revision 18913d5d: make drawing code saner
- 11:37 Revision e8fdf298: Added info on capture card
2010-03-29
- 18:59 Revision 21e896f2: fixed streamer.py
- 18:52 Revision d4932f0c: added vumeters at output, need to test
-
- ...
- 17:55 Revision a10d07b8: don't have build-aux directory
- 17:54 Revision ce4030e0: fixed bug in drawing
-
- this may be solved by using the plug/socket api
-
- How to reproduce:
1. Bob add Alice to his contact list.
1. Bob call Alice
1. Alice takes the call
1. Alice ha... - 13:51 Revision a0e668c1: added some video hardware documentation
-
- fixed in branch r5522
- 13:37 Revision 5f84a292: call gst_init and gtk_init as early as possible, fixes #394
- 12:16 Revision 00dfac8b: Added video graphic card text
- 12:13 Revision c67b011a: older autotools won't make build-aux
- 01:14 Revision 18054227: includes deprecated
- 01:07 Revision c7fc529a: includes deprecated
- 00:52 Revision cf35b372: use build-aux
2010-03-28
2010-03-27
- 18:25 Revision 3755363a: vumeters ready for testing in scenic
- 18:13 Revision a6ba2844: added optional plugins to gst check in trunk
2010-03-26
- 15:11 Revision 4e7d042b: more vumeters in test
- 14:17 Revision 829766b1: added some chapters parts: software, command line, network
- 13:09 Revision bf572bbf: fixed index
2010-03-25
- 18:40 Revision df30e32c: 8 channel test
-
- and at a higher level
- 17:04 Revision 521e0d1d: order of subdirs is important
- 16:41 Revision 1a2fc4ae: renamed m4 file
- 15:42 Revision abcd8d6f: scenic is ready for the vumeter party
- 15:36 Revision 98788e7c: deleted docbook test files
- 15:34 Revision 635be2be: reorganisation of docbook files and folders; added parts of software installat...
- 14:20 Revision 6b2ea53b: milhouse is good to go with audio level
- 11:01 Revision c8daf25f: audioLevel is ready
- 09:34 Revision f33a1991: getting vumeter in
- 02:02 Revision 24407aa0: Separate docbook file in various chapters.
2010-03-24
- 16:08 Revision a2cb31a6: skip tests requiring x if display is not set
- 15:40 Revision 91090fdd: moved main method into main.cpp
- 15:24 Revision bd01d78f: better test
- 14:55 Revision 37144720: added awesome test
- 14:14 Revision 9b59f395: moved test stuff into appropriate directory
- 14:06 Revision 1b8bdc8d: Added test skeleton
- 12:35 Revision bd1e3e6b: left out makefile.am
- 12:31 Revision d2822d09: added vumeter in makefile
- 11:52 Revision e6cf5bb3: initial commit of files
- 11:47 Revision 27150400: created new branch vumeter from trunk@5489
-
- There was a time when GMainLoop needed to be iterated. Now it doesn't make sense and should be simplified.
2010-03-23
- 19:31 Revision 7724c6c0: completion typo
- install_doc.sh in stable branch
- 19:31 Revision 1788dea6: completion typo
- install_doc.sh in stable branch
- 09:55 Revision 0726917a: Fixed an error with camera name when changing v4l2 input
Also available in: Atom